RB Racing History

First visited Bonneville (Search the exact phrase "Bonneville Salt Flats") in 1958...bought a Rollie Free/Vincent post card.

1974: Three months in Los Angeles before returning to Europe to begin preparations with suppliers on both sides of the Atlantic to race at the Bol D'Or 24 hour race in France. Designed this merge collector four cylinder exhaust or sale in Europe, manufactured in Los Angeles. Dual radius primaries: 2.5" at ports and 6.0" leading to merge collector. Way ahead of its time.

1972-1976 imported US motorcycle products into Europe selling high performance parts, racing chain, tie-downs, shock absorbers etc., to European race teams. Also specialized in high performance brake systems selling AP Lockheed, Scarab, Brembo, and Fontana brakes to European constructors like Hermann Schmid (GP sidecars).

1976-1977 Built special Monoshock, Kawasaki Z-1 powered Endurance Racing chassis in Los Angeles...Taking first USA team in 41 years to 24 Hour Bol d'Or Race at Le Mans, France. 390 lb., 24 liters gas, 3.5 sec Quick-Fill Systems, 165mph. Sponsored by Joe Miller, Tri-Mil Industries; and Russ Collins, R.C. Engineering; Michelin France; Total Petroleum France; Amortisseurs DeCarbon; Champion Spark Plugs; Jerry Greer, Camber Fairing..and Dave and Vic... Born in the USA.

1978 Won 24 hour races: St. Louis, W. Palm Beach with Monoshock chassis. Various pilots included: Roland Freymond, Gilbert Piot, Jean Paul Chaubert, Francis Erard, Gary Scott, Lang Hindle, Greg Cox, Peter Cooper, Charley Finney, Gene Harris, Frank Mrazek, Carry Andrew, Gary Gates, Sam Williams, Jim Kress, Ed Hileman, Terry Statum, Paul Turnbull. Produced customer versions for Kawasaki Z-1, CB750, Suzuki 1000.

Lang Hindle left and Gary Gates right. Gary did the frame fabrication for three Behn Monoshock chassis at our base at Tri-Mil after dealing with a certain hard head fabricator who liked to drop chocolate mescaline and make aluminum railings for Disneyland. One frame was used for testing and then after Nelson Ledges 24hr test we raised the engine position 5 cm...and Gary made two new chassis (46 and 47) for the Bol D'Or. No one else.

We based our engine assembly at MTC engineering in South Gate with the ex preacher Ken Tipton, but we pulled out of MTC after Ken stole virtually all the $5,000.00 of supplies that Randy Hall of Kawasaki USA Racing had furnished for our engine assembly. Pops Yoshimura provided us new blank engine cases for the project. He spoke no English but liked cash. Dave and Vic supplied the donor motors L.A. style. Gary provided the phony Texas license plates.

Note the prototype bodywork. We made one initial tank (pictured above) for testing the quick fills. Jerry Greer of Camber Fairing thought he had a better idea and made a roundish 8 gallon blimp tank that we ran at Nelson Ledges. After Nelson ledges we again designed newer 6 gallon gas tanks using foam blanks and wax incorporating the quick fill valves. Our testing showed, with the tubular backbone splitting the tank, we needed to move the two quick fill ports to the back edge of the tank for a 3 second fill. That's why the top of the tanks were flat and deep at the rear.

People like to use these black and white images that we published implying they were there. They weren't (Vinsky).

Here is Lang at Willow Springs where we did the initial testing prior to going the the 24h test race at Nelson Ledges. Ride around Willow sitting on the tail section with Lang going full tilt. That was interesting. The track management went to lunch and left us alone. Ride the track backwards. Those days are long gone.

Count the spokes. The rear wheel is a seven spoke Morris Magnesium wheel with a cush hub from a Kawasaki LTD. The front wheel is six spokes, made from aluminum, and came from the Maserati foundry in Italy.

The late Elliot Morris, famous for his seven spoke magnesium and aluminum wheels. As we were running his magnesium rear wheel Elliot had doubts a direct bolted sprocket would survive the 24h...So he came up with the idea of using a Kawasaki LTD cush hub. Great guy, very smart. We were with him when he got fed up with foundries, rejected castings, and he put in his own furnaces. An engineers engineer.

When we asked Elliot Morris "Why seven" he said the human eye liked odd numbers and 7 gave better support than 5 spokes, with triangulating spokes on the opposite face. Elliot Morris supported our effort loaning us a Dodge Van to shuffle parts around with that we launched into the air over the railroad tracks in Compton...no damage. Elliot, early on, was a mechanical engineer at Packard Motor Company designing mechnical linkages. Interesting guy.

We had tested the, new at the time, spun Mitchell wheels but they were sensitive to side winds and not as true as the machined cast wheels. We consulted with both Tony Mills at Dunlop and Elliot Morris to set the rim widths to Grand Prix specs. We toyed with running wider front tires but were advised against it. We ran Michelin slicks in France.

Team members wanted to run skinny KR91 Dunlops but that was just not going to cut it in this level of competition.

We should mention that Lang Hindle was the initial development rider and was responsible for us raising the Z1 engine in the frame to get more lean angle after testing at the Nelson Ledges 24h where we scraped the cases below the oil sight window. Lang was chosen as he had a history of going fast. Damn fast. Lang put the bike into the lead and lapped the entire field. Faster than TZ 750 on the Behn Monoshock...1:14 lap times at Nelson Ledges...over 40 years ago.

At the first rider change the 2nd pilot crashed the bike...Sent him home. We ended up running around 18 hours and then pulled the engine to put the motor in a bike that had an engine failure. We found we could out-handle and outrun anything.

We should also mention that Lang went to France with us and crashed on the first lap of practice and was immediately sent home. Idiot. Lang's excuse "Cold slicks". Everyone had cold slicks.

Above: Lang leaving for the lap he did not complete at the Bugatti Circuit, Le Mans. In 2015 Lang called us up to clear the air a bit. We like Lang but are still pissed four decades later.

Lang and Bob, the designer of the bikes and organizer for the race effort, in our pit at Le Mans. There is only one cook in the kitchen.

It should be noted that Lester Wheels had nothing to do with the effort. We ran magnesium wheels supplied by Elliot Morris of Morris Wheels. Elliot was a huge help, a true engineering pioneer. Elliot was, in a past job, an engineer at Packard. At his suggestion we ran Kawaski LTD cush drives on the rear magnesium wheels to prevent the bolts from tearing out.

Our Swiss and French pilots...Gilbert Piot not in the frame. Riders were: Roland Freymond, Gilbert Piot, Jean Paul Chaubert, Francis Erard. All professional. All known quantities. They came on our say-so, took care of their own accomodations and asked for nothing. Try that these days. Passion.

Here you can see one of our Bol d"Or rental vehicles, the second being a small Ford Escort. Two of the Hunsaker USA quick fills are visible that we fabricated with the large Induction Systems valves supplied by Dave Ayers. This was five years before Gordon Murray utilized quick-fill as a pit strategy.

A little known fact is that Gary and Lang drove the bikes from Charles De Gaulle Airport to the Le Mans Race Track. Open exhausts, no passports, no valid registration, no money for toll booths, no helmets, and phony Texas license plates. Wheelies for the French Airport personnel after they filled our gas tanks with free Avgas when we uncrated the bikes out of customs. Try that again. Vive La France.

Over the last 40+ years (1977-onward) various racers who raced our Monoshock bikes have contacted us like Sam Williams (above), Gary Gates, Charles Finney, Ralph White and Ed Hileman. Pretty good memories and some victories to talk about. Various people have surfaced here and there with saying they had some connection to the racing activities. If your name isn't one of the above paragraphs then you sat on the sidelines and didn't go out on a limb like we did. People have used photography that we took to infer they were places they never were...like at Willow Springs where Lang Hindle and Gary Gates did testing...and where we ran around the track unsupervised when they left us to our own devices.

Sam Williams (above) called us up before he died in 2014 looking for parts for his Behn Monoshock. We told him that was ancient history. Sam went to France with us, not as a rider though. He did win 24 hr races on our Monoshocks however. Cancer got him at age 69. We asked him if he had stopped drinking...he said he had and he felt a lot better. Once, while assembling a Monoshock, Sam asked about the weight of the control levers...We threw his hamburger in the trash as a weight saving measure.

Nelson Ledges was his home track where he raced with his #47. When he wasn't racing Kawasakis and winning races he was popping wheelies in Mack Cement Trucks.

Our friend Gary Gates (picture below) welded up the frames for the Bol D'Or race bikes...no one else. No one. Of the two bikes that raced at the Bol D'Or one returned to the USA and was raced and won 24 hour endurance races. The second bike was left with Gilbert Piot in Switzerland...a friend of ours who put together the team of Swiss and French riders who rode the bikes. Carlos and Kari Mestre got the trailers to the race track for the crew.

There are a few of these bikes and frames still around that we sold after the race. After the 1977 Bol D'Or there was an attempt for those peripherally involved to copy the frames and take over the project. Guess what...no one knew how to do it, including those who had raced them. Little things like gas tanks, fairings, seats, shock abosorbers, compression and rebound ratios, custom shock springs, forks designed and custom made in Italy after visiting the factory there, molds, wheels, brakes, exact geometry and a myriad of details were suddenly lacking. One or two were assembled post Bol D'Or that did not come from RB Racing.

One fabricator welded up a copy frame with silicone bronze and the frame came apart (not one of ours). Another welder was called in to copy the frames while we were in France and the front to rear track was off 9/16" as the steering neck was not perpendicular to the centerline. We were asked to straighten that out when we got back from the Bol D'Or but we declined.

Glory is a funny deal. Everyone wants to bask in it, rewrite history, and claim credit for what they never did. They did not design the parts, race the parts, assemble the bikes nor ever even ride or test the bikes...A 165 mph blast on Interstate10 with no license plate, and a wide-open exhaust taking the bike back from getting the seat upholstery made. Endless 20 hour days and, at one stretch, 5 days without sleep to make a race. Funny how people who said they were there actually weren't, either for testing, or racing. Small people grasping for ancient glory they had little to do with three decades plus after the fact. If you did not go to the fire and feel the flames, hide in the shadows where you belong.

In racing and business there are the innovators, the racers, and the risk takers. The rest are bench warmers, armchair experts or simply the hired help.

Here's Gary Gates circa 2012, some 35 years later, with the 1944 T34/85 tank he bought for his Texas-based tank corps, headed by Commanders Sacha and Nicoli. Gary still races XR750's and Nortons. Some people on this earth are worth staying in touch with...not many. Gary is the real deal. Gary welded up the frames for #'s 46 and 47 race bikes and went to France with them. Gary went around the pits and not speaking a word of French came back with a replacement windscreen for one that we broke. Gary.

35 years later Charley Finney sent us 9 pictures from his winng racer at the 1981 WERA Pocono 6 Hour.

"I came across these and thought you might enjoy them. The pictures were taken spring of 81 and the race was the WERA 6hr at Pocono International. We took overall. It was a product of its day, but it was a nice tool for the job. Thanks, Charlie Finney"

Developed Shovelhead Turbos with SU draw-through carburetion. Designed SU Turbo needles. Mel Magnet of Rivera wanted to sell the kits we developed. Said he wanted "100 kits", and, after receiving the first batch of 25, decided to copy them...We got a call from Woody Harrah at PaceSetter saying Rivera Engineering had sent over some parts to copy...Woody sent the turbo header over to Kas Kastner (Nissan Race Director, Sailor, Turbo Guy) as he did not want to mess with it. We called up "Kaz" and went by to see the parts..They were ours. Told Kaz to go for it.

As Mel told us at the time, when we forced him, locking him in his office in Whittier to collect what he owed, "You just don't understand how the business works"

After two years Mel came back to us and said "He had made a mistake about trying to rip us off and wanted to work with us again". He delivered his Shovelhead Superglide to us. We tore it down into 100 pieces, told them we were making good progress when they called and, later on, told them to pick up the bike...In 100 pieces.

Mel passed away years later. It was very clear how he understood business...Starting when he ripped Carl Morrow off in the SU Carburetor business and exited his TV repair shop to start Rivera Engineering.

1979: Imported brake systems from Europe selling to US wheel manufacturers and race teams.

Turbos: At various times in the late 1970's and 1980's built Turbo Kits for Honda CB750 SOHC/DOHC, CBX, CX500, CB1100, Kawasaki Z-1, KZ650, KZ550, ZX10, ZX11, Yamaha V-Max, XS1100, XJ550, BMW K1002V, K1, K75, K1004V, R100, R1100S, R1100RT, K1200LT, K1200RS, Triumph Triples, Triumph 1200 Daytona, Harley Shovelheads, Big Twin EVOs, Sportsters, Buells, V-Rods.

1980 Began producing BMW turbo kits and exhaust systems for BMW distributor. Built last monoshock chassis. Ran Kawasaki turbos (street) 9.40 @ 148mph.

1982-1984 Developed special "PowerMaster"carburetor for Harley-Davidson motorcycles. We were looking for a carb to sell to the Harley market and Dan Ford who was working for us found a 38mm casting on the shelves at Mikuni American Corporation...It was off a motorcycle not sold in the USA. We made a deal with Mikuni Japan to import several hundred of them for $70.00 each and then began development adding a larger volume accelerator pump we made and converting the castings from spigot over to flange mount, plus making up custom throttle cables and inlet manifolds.

Mikuni American Corp i.e Kay Nishi, Lee Chapin, and others decided we might be onto something, so they demanded one for testing. After their testing they requested a meeting where they told us we were no longer needed as they were going to copy our work. We then said "Go right ahead...because what we gave you is not what we plan on selling". We then showed them our "new" version. They went back to Japan and Mikuni Japan said the revision we did was too expensive and to let RB Racing sell the carbs. We did for awhile, then Mikuni American Corp raised our prices from $70.00 per casting to $140.00 per casting.

We sold what we had, junked the rest, tossed $2,000.00 worth of cables in a dumster and moved on. At one point we even developed an automatic enrichening circuit with a solenoid and a snap-action thermal switch.

Keihin Corporation was aware what we had done for Mikuni so they asked us to develop the 41mm FCR Carb for the Harley market. We did...achieving 54 mpg and doing 8000 ft altitude tests as well as odd tests like 45 minute idle testing leaning the bikes to the left and right for both Shovelheads and later on for the first EVOs. We suggested to the Keihin engineers that a 45mm FCR would be required for the larger motors...They said the tooling to do so was out of the question.

The 41mm Keihin FCR project was then turned over to Sudco Corporation and lingered with them for years. They changed our jetting and needle specification...ending up with 36 mpg. Go figure.

Mikuni Corporation then asked us to do development on their 42mm Carb for Harleys which was originally tooled for the inline 4 cyl market for V&H. We declined. Good Reason to do so.

1985 Returned to Bonneville 27 years later with Harleys and Suzukis. Built blow thru carb fuel systems and inlet breather/blow off valves for turbochargers. Introduced first blow-thru turbos for Harleys. Built the World's first intercooled fuel injected motorcycle with our BMW K100 Turbo kit...some still running 25+years later.

1987-1988 Developed specialized carburetor calibrations for CV carbs..ran GSX750's in the 10's and GSXR1100's in the 9's with stock engines. Began fuel injection development program., First Blow -Thru the carbs intercooled Suzuki Turbo. Engineered mechanical turbo scavenge systems for low mount turbos.

1989 First fuel injected Harley. First Fuel Injected Intercooled Harley Turbo. Suzuki GSXR Turbo runs 187 mph at Bonneville wirh rear wheel going 237 mph (aero pig).. Expanded BMW Turbo kits to include newer models.

1990-1992 Suzuki Turbos/Harley Turbos set 200 mph Bonneville speed records--all fuel injected and intercooled. Introduced AIC (Additional Injector Controllers) for use on fuel injected bikes and cars. Sponsored two separate motorcycle streamliners in Bonneville speed records - BMW and Harley powered. Worked extensively and crewed with Bob George's 2nd generation Nitro Burning, Double Engined streamliner. Bonneville and El Mirage records set with both streamliners as well as BMW, Harley, Suzuki RSR Fuel Injected Turbos.

On BMW turbo K100 206 mph El Mirage bike employed our Eight Injector RSR Fuel Injection, Water Injection, Intercooler spray bar, and fuel cool can. Repoed the parts after the record was set. 5 days work just making the stainless 4-1 turbo manifold for that one..plus worlds first nose mounted ice cooled intercooler.

See Bob George's double-engined Harley streamliner at Bonneville in a new video. Get an idea of how complicated these nitro burning missles are. We worked on this one for several years before it was retired and sold in the 1990's. We drove Dave Campos' Suburban to chase him down the course and disarm the fire protection system...Dave getting a soft 200 mph record. Eddie the Eagle went along for the ride. We kept Eddie. Lots of stories with Bob George and his ex Roberta.

Bob George went broke squandering an inheritance running the Millenium Falcon...Bonneville insanity kills everything in it's path.

1992-1998 Continual racing at Bonneville/El Mirage/Muroc resulting in seven 200 MPH Club Speed Records. Developed new turbo systems and exhaust systems for Harley Davidson and continued testing with customers on Fuel Injection on 11 different types of motorcycles as well as automotive and marine applications. Introduced AUTOCAL Fuel Injection Software. Built the first intercooled BMW R1100RS turbo kit which ran a 10 second quarter mile.

Innovations: Closed loop efi produced in-house; Nose mounted intercoolers, computer controlled water injection, first fuel injected intercooled Harleys, Triumphs, BMWs, Suzukis, Kawsakis etc.; Cool cans for fuel on turbo race bikes, intercooler spray bars...records set at Bonneville, El Mirage, Maxton,

1999 Introduced new Blackbird, Pro Street and Pro Gas Harley Turbo Systems. Expanded exhaust system line to over 200 applications. Introduced revised AIC 400 to the automotive market for supercharged/turbocharged applications. Developed new Black Hole muffler systems for cop-evading high speed runs.

Introduction of 113" ORCA RSR Fuel Injected Motors. New 500hp capable BoostMaster wastegates integrated into all turbo kits. Completed 5,000 mile year-long test of new Harley "Blackbird" 250hp turbo with zero problems. RB Racing turbos dominate AHDRA/SCTA events.

2001 One year of designing and testing new BMW K1200RS/LT turbos. Designed new 113" ORCA turbo pistons. Expanded Harley Davidson exhaust line to 300 part numbers.

2002 Began production of older BMW K100 and R1100RS Turbo Kits and updating existing kits. Set up a large separate R&D Facility for testing, engine assembly, prototyping and installations. K1200 series BMW forged turbo pistons tested in K1200RS and LT models. Land Speed 200 mph records set with out ZX-11 Turbos running 221mph in the mile with out RSR 8 injector system.

2003 Completed testing of new Black Hole exhaust systems. Launched new Bonneville project based on 132 cubic inch ORCA motors. Expanded exhaust system line to include LSR Black Hole 2-1 Harley exhausts. Launched new polished silver ceramic finishes. Developed new water injection system for high output street and racing applications.

2004 Continued development of Black Hole Exhausts with introduction of BMW R Series exhausts and fuel system upgrades. New solid state digital instrumentation developed to replace troublesome analog and liquid filled gauges. Introduced new RSR EFi systems with new billet enclosures and 40 pin waterproof connectors with gold-plated contacts. Finalized designs of 139" Turbo ORCA motors. Introduced BMW R series turbos.

2005 Introduced new Harley LSR 2-1 Pro Stock Challenge systems which win AHDRA championship in first year. Redesigned Harley Turbo systems with larger intercoolers and both center mount and left mount turbos. New RSR ECUs enter competition setting records.

2006 Designed new Twin Cam Dyna exhausts and introduced new 113", 126", 132" and 139" ORCA motors in both Twin Cam and V2 configurations. Installed new production and test equipment to include an eddy current dyno. New BMW turbocharger systems designed. Expanded turbocharger applications for Harley big twins both oem and custom as well as race versions.

2007: Readied introduction of solid state instrumentation packages. Fabbed up new 500hp turbo configurations. Purchased new CNC equipment to introduce new, sort of unusual, products. Continued a 6 year support system for Nitro burning Harley Top Fuel and Pro Fuel projects. Bonneville Bullett nears completion.

Mike Geokan's Bonneville Bullet nears completion as a testbed for new RB Racing technologies. Salt Flats in 2007 were wet and less than ideal. Follow Bullett's progress as we gear up for 2008. The RB Racing's involvement ended in 2017...zero to a soft 200mph record in three years. In 2017 Mike showed his ugly side, so we departed.

2008: Flat out completion of the Bonneville Bullet project ending in first test runs at Bonneville in August of 2008. Starting producing digital gear position indicators.

2009: Graduated a Caltech Physics major now headed for a 5 to 7 year Doctoral Physics program. While we grab the twist grip and go past 200 mph others use particle accelerators at 99.99% the speed of light to study gluons and quarks. Someone always has more expensive toys than you do. Qualified the Bonneville Bullet for long course at Bonneville at the 2009 World Finals with Bryan Stock taking over for the injured Mike Geokan.

2010: Expanded operations 100% and purchased more CNC equipment to build a new range of high performance products. Stripped the Bonneville Bullet down to ground zero in preparation for 2010/2011 record attempts. Upgraded dyno operations with a Superflow Dynamometer.

2011: Introduced new Harley Turbo systems aimed at FLT/FLH Baggers featuring 360 hp turbos with large intercoolers.

2011: Made two trips to Bonneville and picked up a 200 mph record on the Bonneville Bullett with Bryan Stock doing the driving chores.

2012: Introduced new LSR 2-1 RaceCat exhaust systems marrying our race winning Pro Stock exhausts with a clean burning catalytic converter to drop the Db a bit. Finished a 10,000 mile test of our new Harley Turbos and started development of our 360 hp Road Glide. The Bonneville Bullet began it's next stage to the upper 200 mph range with upgraded high-end Cosworth electronics, beta tested on our own "Road Toad".

We also designed new 1000psi water injection systems for our turbocharger systems. Super fine atomization is the key to more power and no detonation at high boost levels...like 535 hp Harley Turbo Orca motors.

2014: Revised our BoostMaster wastegates and continued development of advanced turbocharger control with Pectel SQ6M engine controllers. We machined up billet mounting systems for Pectel SQ6, SQ6M and SQ6M12 engine controllers and began shipping these out. We converted our Bonneville Bullet and test Road Toad to Pectel Fly-By-Wire control which is quite complex. Carl Pelletier updated our 139CID Bullett ORCA Motor for racing in 2015 (2014 was rained out) and we installed a new mil-spec wiring harness on the Bonneville Bullett for the Pectel SQ6M with 49 outboard connectors and sensors.

2015: Kept up work on advanced electronics calibrations for our Bonneville and test projects. Built a simulator for the Pectel SQ6M Controller

2016: Prototyping of new Indian Scout Exhausts. Student finishes 23 years of schooling with a PhD in Physics...he does not know what a Crescent wrench is.

2017: Harley comes out with the new M8 motor and we tool up for a variety of LSR 2-1 exhaust systems. Here is a 2" LSR 2-1 Pro Stock Spyder exhaust 00-1396 in Dual Coat Black Ceramic. New 2018 Softail M-8 exhausts prototyped.

2017 SpeedWeek: Diana Sterk is busy documenting the scene at SpeedWeek. The below link is Diana's photography of 2017 SpeedWeek. Diana has varied photographic interests...old cars, hot rods, bikes/bikers, musicians, bands, nature, the homeless, and others. You can purchase her photos by clicking on the link on that page.

Diana maintained a Facebook page for us for two years but we asked her to shut it down in 2019... Time to move on as we closed out our Bonneville support in 2017. Politics and egos. We funded her trip to Sturgis in 2018 as a final "Thanks" for all the effort she put in...then adios.

https://photography-by-diana.smugmug.com/Bonneville-Salt-Flats/Second-Folder-2017-Speed-Week-/

2017 SpeedWeek...Diana Sterk was palling around with Burt Munro's son, introduced us to him, and we got to exchange lies and tall tales about motorcycles. His tall tales were better..like riding through town in New Zealand at full throttle standing on a motorcycle seat running all the lights all the way to the harbor.

We countered with a 1985 story about exiting the salt on a twin turbo Suzuki going 135 mph back up the access road and then realizing we had no brakes and a 90 degree left hand turn was coming up. Of course we died...Plus financing a trip to visit the ladies in Wells.

Crazy as his dad. Stories about Ed Iskendarian and his father and many others. We asked him if he worked his way over on a tramp steamer..."Yes at 30,000 feet". His stories were definitely better.

2018: Developed new Indian Chief true LSR 2-1 exhaust systems with separate left side bag support system

2018: One of the last of our RSR Closed Loop EFi Systems we will be shipping. We started this closed loop efi intercooled turbo stuff back in 1989 and set all sorts of speed records and won drag racing championships..All pretty much on our predictive programming with very little input from the customers. Our RSR EFi systems went on bikes that were carbureted or scratch built race bikes. We were way,way, ahead of the curve.

The last 4 years we have been testing and racing with high-end Cosworth Pectel SQ6M electronics at Bonneville. These systems have a very steep learning curve with over 8800 programmable functions and tens of thousands of entries. Since few of our customers understood our EFi, which was dead simple, even when we wrote the programs for them, going to a more sophisticated system will be interesting. These will only be going on scratch built bikes with Single Cam EVO Orca motors or 32-2 Crank Triggered motors with no OEM electronics. Complete control of all functions in one black box.

We have turbo systems for the OEM EFi Harleys 1999 to present.

2018: Bye Bye Twin Cams. It's down to Dressers, Sportsters and Softails. Long gone EVOs.

2018: Completed design work on the 14 new M-8 Softail models. Harley sure killed the FXR and Dynas off and tries to position these 14 models as replacements. Expanded these to four product ranges all in 2" primary tubes. 4 valve heads but the exhaust ports are the same. Go figure.

2019: "FXR's or Die" as Elvis says. This is a 2008 Dresser Swingarm that bolts directly to the 5/8" FXR Speed Tranny. $895.00 outright. For big inch or turbo FXR's.

You use the later 25mm axle and rear wheels and brake assemblies. Twice as strong as the OEM FXR arm and way better than any aluminum aftermarket non-heated treated piece.

2020: Added new 00-1306R Challenge exhausts to give horsepower freaks a bit of sound attenuation. Straight through 2.5" I.D. resonator to knock off a few Db. Acceptable noise and 180HP plus on new M8's with 124/128 CID.

Upgraded our long running RSR Air Fuel Ratio gauges..both the dual and single display models.

Continued work on our completely revamped Turbo Orca FXR.

2021: Developing new Turbo Systems for Shovelheads and EVOs. Revamped BMW R100 2-1 exhausts adding Dual O2 displays. Stay tuned for more insanity.